Arc Flash Hazard Analysis / Risk Assessment

Image
  1. What are the steps involved in Arc Flash Analysis? A. Arc Flash Hazard Analysis or Risk Assessment is a study conducted by trained safety experts to analyze electric equipment and power systems in order to predict the amount of incident energy from an arc flash. According to IEEE std 1584, there are 9 steps involved in this Arc Flash Analysis, which we are going to discuss here. Step 1: Collect the system’s installation data: The largest effort in an arc-flash hazard study is collecting the data from the site. Start by reviewing the one-line diagrams and electric equipment, site, and layout arrangement with people who are familiar with the site. The diagrams have to be updated to show the current system configuration and orientation before the arc-flash study starts. The one-line diagrams must have all alternate feeds. If SLDs are not ready, prepare them.              Once the diagrams are completed in the basic electric system scheme, enter  the data needed for the short

How to Improve Production using 3D Simulation and Data Analytics

Planning, designing and modeling of a system by simulation before the real-time implementation is the present day trend. Mostly for Manufacturing systems, this design and modeling will give more advantage in terms of money, production, effective usage of resources etc.
Lean manufacturing simulation facilitates you with the optimal solution in this area. Lean manufacturing is a systematic way to eliminate waste within the manufacturing process. This lean manufacturing can be achieved by using design manufacturing process services. We at VB Engineering provide design and planning services for industries, warehouses, supply chain management systems etc. Design for lean manufacturing is a method for applying lean concepts to the design phase of a manufacturing process, supply chain, logistics systems.
We at VB engineering use latest technology to apply lean concepts to a system and remove waste like underperforming assets, non-profitable machines etc from the system before going to the real time implementation part of it. We use FLEXSIM software to design and model the system and apply lean and six sigma lean concepts to it and get optimal solution. We at VB Engineering provide six sigma consultancy services, lean manufacturing services etc.

Comments

Popular posts from this blog

What is Infrared Thermography?

How to do Industrial Earthing for Electrical Equipment

Kingdom of Saudi Arabia Safety Compliance Requirements for Arc Flash Risk